本站使用自主及第三方信息记录程序。点击“同意”或继续浏览网站,您同意使用信息记录程序。了解更多关于信息记录程序及如何安装使用的说明。
接受
close
联系我们
Overview

OmniVision's OH01A10 image sensor leverages PureCel®Plus-S stacked-die architecture to provide the high resolution, compact size and cost effectiveness required for the next generation of disposable and reusable endoscopes and catheters. The OH01A10 is the world's first medical image sensor to capture 1280 x 800 resolution at 60 frames per second (fps) in a compact 2.5 x 1.5 mm package.

These features make it ideal for many endoscopic devices, including those used in airway management (esophagoscopes, laryngoscopes, thorascopes, pleuroscopes, bronchoscopes, mediastinoscopes); gastrointestinal (gastroscopes, duodenoscopes, amnioscopes); and urology (utero-renoscope) applications.

Compared with previous-generation sensors, the OH01A10 consumes 25% lower power, which keeps the distal tip of the endoscope cooler for greater patient comfort. A high chief ray angle of 32 degrees enables a slimmer module and a wider field of view for flexible endoscopes with tight bend radius and close-focus requirements. Two OH01A10 image sensors can be synchronized to produce stereo, 3D images for surgical procedures.

The OH01A10 has a 1/11-inch optical format and a 1.12-micron pixel size. The sensor supports multiple resolution formats and frame rates with RAW output, including 720p HD at 60 fps in a 16:9 aspect ratio and 800 x 800 at 60 fps for a 1:1 square image for a crisp, jitter-free image. The sensor's PureCel®Plus-S stacked pixel architecture delivers the highest-quality images with improved sensitivity, high full-well capacity, no blooming and low color crosstalk.

Support for both MIPI and sub-LVDS output interfaces allows the OH01A10 to transmit image data over long distances. It also integrates one-time-programmable (OTP) memory to store manufacturing and calibration information.

The OH01A10 can be autoclaved for reusable devices and sterilized for disposable ones.

Features

Highest resolution in small die size

Best image quality

High frame rate for jitter-free images

PureCel® high color fidelity
- High FWC with less saturation
- Best low light sensitivity
- Almost no blooming
- Low noise
- Better color crosstalk
- Higher QE performance

Supports images sizes:
- 1MP (1280x800)
- 720p (1280x720)
- 800 x 800
- VGA (640x480)
- 400 x 400, and more

Output format can be 8/10-bit RGB RAW

Stereo ready (frame sync)

Sync light source (strobe)

Horizontal and vertical subsampling

Low power
- More than 25% lower power than previous generation
- Low power mode for subsampling modes (less than 10 mW)

On-chip phase lock loop (PLL)

2x2 analog binning

Image quality controls:
- Lens shading
- Denoise
- Manual exposure
- Gain control
- Defect pixel correction
- Automatic black level calibration

Group hold

Part Specification
SpecOH01A10-A16A-1A-Z
封装CSP
科技PureCel®Plus-S
界面MIPI / LVDS
快门方式Rolling Shutter
分辨率1MP
色彩阵列(色度)Color
模拟/数字Digital
电源需求Active: 52 mA
XSHUTDOWN: 10 µA
Standby: 1 mA
输出规格RAW
操作温度-30°C to +85°C
镜头规格1/11"
帧频Full @ 60 fps
像素尺寸1.116 µm
成像范围1446.34 x 910.66 µm
封装尺寸2533 x 1534 µm
产品指南PDF
keyboard_arrow_up